FAG NU1052-M1A-C3 Cylindrical Roller Bearing - 260 mm ID, 400 mm OD, 65 mm Width Take-Up Bearing The ratchet can be used

The ratchet can be used as a conventional screwdriver in the 0° position by attaching an adaptor and a bit

and bushings

The ball joint extractor with lever translation of series 129 is used to press out the ball pins when removing ball joints and tie rod ends on steering rods in passenger cars

The range impresses with its multifunctional application possibilities and is suitable for external pulling

while soft handle zones guarantee high torque transfer

FAG NU1052-M1A-C3 Cylindrical Roller Bearing - 260 mm ID, 400 mm OD, 65 mm Width Take-Up Bearing The ratchet can be usedCylindrical Roller Bearing FAG cylindrical roller bearings handle heavy radial loads with high speed and stiffness. The line contact between rollers and raceways gives them high load capacity, and the various designs (NU, NJ, NUP, N) allow them to accommodate axial displacement or take small axial loads. They are ideal for gearboxes, electric motors, and heavy industrial equipment.