NSK NU304-W Cylindrical Roller Bearing - 20 mm ID, 52 mm OD, 15 mm Width Yoke Type Track Roller The bell-shaped direct press ball

The bell-shaped direct press ball joint puller of series 127 is used to press out the ball pins when removing ball joints as well as tie rod ends on tie rods in automotive and industry

Equipped with a Type-C port rechargeable lithium battery

High quality bits for recessed TORX® screws in a practical Bit-Box

The hooks or arms of the PULLPO are inserted into the outer ring of the bearing using the rings

FCC 47 CFR Part 15 Class B

NSK NU304-W Cylindrical Roller Bearing - 20 mm ID, 52 mm OD, 15 mm Width Yoke Type Track Roller The bell-shaped direct press ballCylindrical Roller Bearing NSK cylindrical roller bearings handle heavy radial loads with high speed and stiffness. The line contact between rollers and raceways gives them high load capacity, and the various designs (NU, NJ, NUP, N) allow them to accommodate axial displacement or take small axial loads. They are ideal for gearboxes, electric motors, and heavy industrial equipment.